Vivo Y69 FRP Bypass With SP Flash Tool: Vivo Y69 FRP Bypass into ADB Mode (2023) is the newest A-FRP unlock method we’ve posted. While this may be the simplest trick available, if you want to learn “how to remove Vivo Y69 Android Nougat FRP lock using SP Flash Tool,” then keep reading this post.
This post will explain how to bypass the Factory Reset Protection on the Vivo Y69 using the SP flash tool. There’s no need for any premium flash tool in order to unlock pattern locks, pin locks, fingerprint locks or Google account verification [FRP] on the Vivo Y69 v7.
There are multiple methods available to remove factory reset protection from Vivo Y69 Nougat v7.0 Smartphone. For instance, users can delete frp in adb mode or utilize Sp flash tool to unlock Vivo Y69 2017 mobile.
Believe me, this method is 100% working and tested for Vivo V69 Android Nougat phone. As you may already know, Vivo Y69 runs on Mediatek chipset-based Android software and its firmware comes with scatter loading files. So to flash this phone with MTK flash tool or Sp flash, just follow these steps below:
Removing Google accounts from Vivo Y69 mobile phones is a cinch; no technical expertise required and you can do it from home! Simply read this post carefully and apply it on your Vivo Y69 handset.
NOTE: This post is only and only for Vivo Y69 android Smartphone. So don’t try it on any other vivo devices. Wrong or un-supported files flashing may brick the device permanently.
Vivo Y69 FRP Bypass Using Sp Flash Tool
As we already told you, vivo Y69 is a mediaTek [MTK] MT6750 chipset based android phone. So we are going to use free sp flash tool to flash Vivo V69 frp bypass files.
Let’s see “how to remove frp on Vivo Y69 mobile?”
Download Vivo Y69 FRP Flash Files, Tool and Drivers
Instructions To Reset Vivo Y69 FRP Using Sp Flash Tool
- First off download Vivo Y69 USB drivers and install it on windows pc. Extract drivers, enter into folder >> select “MT65xx_Preloader” folder >> run “InstallDriver.exe” as administrator.
- Extract the downloaded “Sp flash tool” and run “flash tool.exe” as administrator.
- Once tool launched on pc, Press Ctrl + Alt+ V from keyboard.
[Above command will launch Sp flash tool into Advanced Mode]
- Next press Ctrl + Alt + S from keyboard.
[Command will open secure Mode on Sp flash tool.]
- Click on “Download Agent” button and load DA_PL.bin from Vivo Y69 flash tool folder.
- Again click on “Scatter loading” button and load the “MT6750_Android_scatter.txt” file from Vivo y69 frp bypass files folder.
- Click on “Auth file” button and load “auth_sv5.auth“Authentication file.
- MOST IMPORTANT: Untick “preloader” option from log window. This step is must.
- Now Go to “Format” Tab” >> Select “Manual Format Flash” option and replace the values from below values.
Begin Address[HEX]: 0x2a88000
Format Length[HEX]: 0x100000
[Make sure you have replaced the correct values as shown above]
- After configure the tool, hit on Start button to start vivo Y69 frp bypass process.
- Now power off device properly, press & hold Volume Up Key+ connect it with pc via USB cable at the same time.
- Once your device detected with pc, process will start. [Don’t unplug the USB cable in any how condition]
- End of the process you will see Successful message on the screen.
Vivo Y69 FRP Reset done. Now wait to reboot the device normally and setup it again. This time it will now ask to verify Google account verification.