Vivo U10 Flash File: Download Official Stock Firmware Flash File For Vivo U10 PD1928F . Should You Have Vivo U10 Smartphone and also you Need to get the Stock ROM /Flash File/For then You’re on a Correct Place, You Need to do this by following the Below Guide.
nnnnAbout Vivo U10 PD1928F
nnnnThe Chinese smartphone manufacturer Vivo has just established an entry-level budget section smartphone named Vivo U10, which has very impressive hardware specifications, improved cameras, and updated applications. This manual is for you if you are using the Vivo U10 handset or believing to receive it. If you would like to set up the Stock Firmware on Vivo U10, then it is possible to check this article entirely. Here we’ve shared the practical manual on How to Install Stock ROM on Vivo U10 PD1928F.
nnnn
Android users wish to customize their devices significantly for a more comprehensive look or accessibility. But occasionally, users can face problems like boot loop, bricking, software bugs, low functionality, and much more. Accordingly, to correct those problems, going back into the Stock ROM or even upgrading/downgrading that the firmware will be critical. Here we also have shared with the download links, demands which will be practical to flash a firmware file.
nnnnVivo U10 PD1928F Flash File Firmware QPST (Stock ROM)
nnnn| Vivo_U10_PD1928F_EX_A_1.11.3 |
| U10_PD1928F_EX_A_1.10.3 |
| Vivo_U10_PD1928F_EX_A_1.9.5 |
| U10_PD1928F_EX_A_1.9.3 |
| QPST Tool |
| Qualcomm Driver |
Vivo U10 PD1928F OTA File Download
nnnn| PD1928F_EX_A_1.9.5 |
| PD1928F_EX_A_1.10.6 |
| PD1928F_EX_A_1.10.7 |
| PD1928F_EX_A_1.11.3 |
| PD1928F_EX_A_1.11.4 |
| PD1928F_EX_A_1.12.3 |
How to Flash Vivo U10 PD1928F:
nnnnDownload Vivo U10 PD1928F Flash File and Then Install Qualcomm Notebook, Charge the Telephone 5-% Prior to flashing.
nnnn- n
- First, download all the files above. nnnn
- Extract All File From Zip File. nnnn
- Install QPST Tool and Run Qfil.exe File nnnn
- Select the flat build option after the tool is open. nnnn
- After that, click on the select programmer’s path to browse and select the file “prog_emmc_firehose_8xxx.mbn”. nnnn
- Then click on load.xml and select the “rawprogram0” file. nnnn
- Then select the file patch0. nnnn
- After selecting all the files with the flash tool, Vivo U10 must connect the phone to the instrument. nnnn
- For that, turn off the phone and press the Volume Up and Volume Down buttons simultaneously. nnnn
- And then connect the data cable with the phone. nnnn
- After connecting, click on the select port in the tool and select Qualcomm HS-USB QDLoader 9008 nnnn
- Then click on the download button. And wait till flashing. n
Note: During flashing, do not remove the data cable from the phone. Otherwise, the phone can go into dead mode.
nnnnn