Tecno Spark 8P KG7 Frp File & Pattern Unlock Using SP Tool

Official Stock Flash Firmware Now Available for the Tecno Spark 8P KG7 Frp File and Pattern Unlock. This firmware can be used to correct any software issues in your Tecno Spark 8P KG7, such as fastboot Mode or FRP lock. It also enables blank or white after flashing, uneventful recovery, dead after Flash etc., etc.

Get the Tecno Spark 8P KG7 Firmware File and Pattern Unlock from this page. The provided firmware file from Tecno was the original one, contained within a scatter file. This tells you how to flash it, with driver installation provided by SP Flash program. Here’s an explanation of using a scatter file for flashing Tecno phone; its instructions can be found further below in detail. Manual for Flashing Phone (PDF)

Tecno Spark 8P KG7 Frp File & Pattern Unlock Using SP Tool

Tecno Spark 8P KG7 Flash File SP Flash Tool

Software Version
KG7-H6913N-R-GL-H2-220428V42
Flash File Name: KG7-H6913HIJL-R-OP-210827V159
File Size: 2.6 GB
OS: Android 11, HIOS 7.6
Flash File Name: KG7n-H6913K-R-OP-210827V168
File Size: 2.6 GB
OS: Android 11, HIOS 7.6

How to Unlock Pattern & Frp Lock In Tecno Spark 8P KG7:

  • Download all of the Documents in the above links if the link is not Functioning.
  • Only leave your comment on below comment box
  • Install WinRAR software on your Pc or laptop to Get extract downloaded Hyperlinks
  • Extract all Document and Then paste into desktop
  • Initial Install libusb win32 devel filter 1.2.6.0 OR MediaTek USB Notebook and after that Reboot (Restart) Computer
  • Open MCT MediaTek USB Driver Tool Click BYPASS
  • Switch OFF Phone Press and Maintain Volume Up + Down and Add USB Cable
  • Wait Until Improving
  • When Done Disable Protection, You can Watch like Below Picture
  • Open SP flash Instrument Click Scatter-loading Select button and Choose Android_scatter Document
  • Click Download-Agent and Select MTK_AllInOne_DA.
  • Go to Option ► Connection and Set Com Port (COM:3) and Baud Rate (921600)
  • Now Open Device Manager and Check Your Phone Com Port (Check below Image for more Information)
  • Now go to Userdata Format Tab and click to Manual flash

FRP

physical_start_addr: 0x3208000
partition_size: 0x100000

Pattern:

physical_start_addr: 0x1e0000000
partition_size: 0xc0000000

  • Click on the Start button
  • Wait Until Completed.

Read Also:

Leave a Comment