On this page, you will find the official link to download Lenovo Z2 Plus Stock Firmware ROM (flash file) on your Computer. Firmware comes in a zip package, which contains Flash File, Flash Tool, USB Driver and How-to Flash Manual.
nnnnAbout Lenovo Z2 Plus
nnnnLenovo Z2 Plus is a smartphone that was produced by Lenovo. It was released in 2016 and was considered a mid-range device. The device is powered by a Qualcomm Snapdragon 820 processor with 4GB of RAM and 32GB/64GB of internal storage. It has a 5-inch IPS LCD display with a resolution of 1080×1920 pixels.
nnnnThe Lenovo Z2 Plus features a dual-camera setup on the back, with a 13-megapixel primary sensor and an 8-megapixel front-facing camera. It runs on Android 6.0.1 (Marshmallow) and is powered by a 3,500mAh non-removable battery.
nnnnThe device also features a fingerprint sensor, 4G LTE support, and a USB Type-C port. The Lenovo Z2 Plus is a well-rounded device that offers good performance and features for its price. It was considered one of the best devices in its price range when it was released.
nnnn
Download Lenovo Z2 Plus Stock Firmware (flash file)
nnnnFile Name: Lenovo_Z2_Plus_Z2132_Q01017.1_M_ZUI_2.0.093_ST_160811_QPST.zip
File Size: 1 GB
Password: Sonu@Ansari@786
Firmware Link: Google Drive
Download Lenovo Z2 Plus QualComm Driver
nnnnFile Name: Leveno Z2 Plus Z2132 Flashing Driver.zip
File Size: 9 MB
Password: officialroms
Driver File: Visit Here
How to Flash Lenovo Z2:
nnnnTo flash firmware on a Lenovo Z2 Plus, you will need to use a tool called QFIL (Qualcomm Flash Image Loader). Here are the general steps you will need to follow:
nnnn- n
- Download the latest version of QFIL from the Lenovo website or other reputable source. nnnn
- Download the stock firmware for your specific device and version from the Lenovo website or other reputable source. Make sure you download the firmware that is specific to your device and version. nnnn
- Extract the firmware file and save it to a convenient location on your computer. nnnn
- Extract QFIL and launch the program. nnnn
- Connect your device to your computer using a USB cable, and put your device into fastboot mode. To do this, turn off the device, then press and hold the Volume Down + Power buttons. nnnn
- In QFIL, click on the “Browse” button and navigate to the firmware file you extracted earlier. nnnn
- Click on the “Download” button to begin the flashing process. nnnn
- Wait for the flashing process to complete and your device to reboot. n
It’s important to note that flashing firmware can be risky and may brick your device if not done correctly. It’s always recommended to backup all your data and files before proceeding.
nnnnYou may also need to install Qualcomm USB drivers for QFIL to be able to see the device. Make sure you install them before starting the flashing process.
nnnnnnnnReadme Once:
nnnn[*] Take a Backup: If you are going to flash the above Firmware on your Lenovo Z2 Plus device, then take a backup of everything as because your personal data will be deleted after flashing the stock firmware.
nnnn[*] The firmware shared on this page is officially released by the company and helps you to recovery your device if you ever got bootloop, software error, update error, hanging and dead issue.
n