The iTel Vision 2 L6503 Flash File now has official stock flash firmware. This firmware will fix any software issues with your iTel Vision 2 L6503, including hang-on logos, fastboot mode, and FRP lock. You may also use it to show blank or white after flashing, uneventful recovery, dead after Flash, and so on.
nnnn
About iTel Vision 2 L6503
nnnnThe Itel Vision 2 phone was released on April 26th, 2021. The display is a 6.60-inch touchscreen with a resolution of 720×1600 pixels and a 20:9 aspect ratio. The Itel Vision 2 is powered by an octa-core processor and has two gigabytes of memory. Its Itel Vision 2 is powered by a strong 4000mAh battery and runs Android 10 (Go Edition).
nnnnIn terms of cameras, the Itel Vision 2 is the best. The Itel Vision 2 boasts a triple camera setup on the back, with a 13-megapixel primary camera and a 2-megapixel secondary camera. It has a single front camera setup that can be used for selfies, and an autofocus rear camera setup. It has an 8-megapixel camera on board.
nnnnDownload iTel Vision 2 L6503 Flash File
nnnnPassword: officialroms
nnnn| L6503-F6315-10.0-OP-V043-20220125 |
| L6503-F6315-10.0-OP-V036-20210519 |
| Research Download Tool.zip |
| Upgrade SPD Tool |
| SPD USB Driver |
If This Tool Doesn’t Work, Try This One: Transsion Software Download Tool
nnnnRead Also: Itel Vision 2 L6503 Frp File
nnnnHow to Flash iTel Vision 2 L6503:
nnnnInstall SPD Driver
nnnn1. Download the package and Extract Flash Tool.
nnnn2. Once you have the icon, double-click SPD Research Tool.exe.
nnnn3. It will launch the program on your PC.
nnnn4. Click on the load packed button and select the Firmware that has an extension of .pac at the end.
nnnn5. Click on the “Download” button located in the third spot.
nnnn6. Switch off your mobile phone and connect it to the PC with the volume down button.
nnnn7. It will guide you to a successful flashing.
nnnnRead Also:
nnnnn
[…] iTel Vision 2 L6503 Flash File Tested (official Firmware) […]
[…] The ITel Vision 2 L6503 Flash File Tested (official Firmware) […]