Download Official Stock Firmware Flash File For Doogee Y9 Plus.If You own Doogee Y9 PlusSmartphone and You want to Download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.Doogee Y9 Plus Run on android 9.0 & it is Powered by Mediatek MT6739 Processor. itis a Dual SIM (GSM) Smartphone Support Nano-SIM Card’s, Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.
nnnn
Doogee Y9 Plus Firmware Flash File Stock ROM)
nnnnnnnnInstructions to Flash Doogee Y9 Plus Stock ROM:
nnnn- n
- First of all Download the ‘Doogee Y9 Plus flash file zip‘ which is given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool. nnnn
- Then download the Doogee Y9 Plus USB driver and set up it on your computer. In case you have already installed the USB driver on your computer skip this step. nnnn
- Next, switch off your smartphone and take away the battery (if it is removable). nnnn
- Now go to the sp flash tool extract folder and launch it. nnnn
- As soon as the SP Flash tool is launch, click on the Download tab. nnnn
- Now, click on the Scatter-loading button within the download tab. nnnn
- Choose the scatter file from the Doogee Y9 Plus firmware extract folder. nnnn
- Now click on the Download button to start the flashing process. nnnn
- Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press volume up or volume down button at the same time. nnnn
- The flashing process will start momentarily, and it’ll get accomplished in a minute or two. n
- n
- As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool. nnnn
- Now, close the SP Flash tool and unplug your smartphone. nnnn
- That’s it. Now you’ve successfully flashed stock ROM on your Doogee Y9 Plus. n
Disclaimer:
nnnn- n
- Please read and understand the Full guide before flashing “Doogee Y9 Plus Firmware”. nnnn
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide. nnnn
- Before flashing, Stock ROM on Doogee Y9 Plus must have a 70–80% charge. n
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!
nnnnnnnnAlways remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
n